若需提供樣品，我部將收取樣品費，樣品費統一價：50元，若貴方日后和我部合作成功，我們將退還收取的樣品費，謝謝合作！

使用說明

     本測電筆適用于直接測檢12-220V的變直流電和間接測檢交流電的錢，相線和斷點檢測。

1電壓測檢：

  a.后數字為所測電壓值；

  b.未到高段顯示值70%時，顯式低段值；

  c.測量直流電時應手碰負；

  d.測量少于12伏電壓物體是否帶電，可用感應電；

  e.帶感應電的被測物須接地或接。

2感應測檢：

  檢測并排線路時應線間距或用手按住被測物

3斷點測檢：

  沿相線縱向移動，顯示窗內無顯示是為斷點處。

注意事項：

     勿同時接住兩個電進行測試。否則檢測結果將會不準確或會削弱感應靈敏度。

Dirctions:

This tester is suitable to meas. ure 12-220V A.C. and D.C. diectly as well as measure the groud line,phase line and the breakpoint of the A.C. in directly

1.Voltage measeurement:

   (1)the final dis are the meaasured voltage.

   (2)if the display value can not reach 70% of the high section, it will display the lower section.

   (3)touch the negative pole with hand when megsure D.C. circuit.

   (4)use induction pole when me asured bodies under 12 volts charged or not.

   (5)when induction body is under measured, it must connect to ground or zerc.

2.Induction measurement:

  when measurements is performed on one of the plet lines, it is necessary to widen them, or press the measured line with your hand so as to eliminate interference.

3.Breakpoint detection.

move lonudinally along the live wire, display window with nothing means the breakpoint.

Caution:

Do not press two poles at the same time while detecting, or it won't display the exact section or the induction will be decreased.

地址：浙江義烏國際商貿城2期F2-13620

聯系人:張偉斌

TEL/FAX:

手機:

Email:

地址：浙江義烏國際商貿城2期F2-13620

聯系人:張偉斌

TEL/FAX:

手機:

Email:

地址：浙江義烏國際商貿城2期F2-13620

聯系人:張偉斌

TEL/FAX:

手機:

Email:

地址：浙江義烏國際商貿城2期F2-13620

聯系人:張偉斌

TEL/FAX:

手機:

Email:

地址：浙江義烏國際商貿城2期F2-13620

聯系人:張偉斌

TEL/FAX:

手機:

Email: